WEB COUNTER
Online: 20
Visited: 78990
Polyaluminium chloride (P.A.C)
Polyaluminium chloride (P.A.C)

 Formula [Al2 (OH) nCl6-nXH2O] m
Origin: China
Packing: 25 kg / bag
1. INTRODUCTION
- Use: used flocculation in water treatment and waste water
- Basic Chemical Composition: Poly Aluminium Chloride, more original chlorine disinfectant.
2. SPECIFICATIONS
- Used for water treatment software (standard / results)
              
Al2O3,%: 30.0 / 30.50
              
B,%: 40 - 49 / 78
              
pH,%: 3.5 - 5.0 / 3.8
              
Water insoluble,%: 0.3 / 0.1
              
As,%: 0.0002 / 0.00017
              
MN,%: 0.0075 / 0.0070
             
CR,%: 0.0005 / 0.0005
- For waste water treatment: (standard / results)
             
Al2O3,%: 30.0 / 30.20
             
B,%: 40 - 49 / 80
             
pH,%: 3.5 - 5.0 / 3.8
             
Water insoluble,%: 0.3 / 0.2
             
As,%: 0.0002 / 0.00017
             
MN,%: 0.0075 / 0.0070
             
CR,%: 0.0005 / 0.0005
3. ADVANTAGES
- Limit the adjustment of pH acidic water sources such as the type currently in use, thus saving dose of chemicals (used to increase alkalinity) and the associated equipment such as tanks and chemical metering pump.
- Use low doses, cotton residue to easily settled.
- Reduce the volume of sludge.
- Increase in the water after settling, filtration prolonged period and increase the quality of water after filtration.
- Not runny or lumpy after opening the package.
- Use best when combined with vichemfloc 62424.
4. DIRECTIONS FOR USE
- Preparation of a capacity of 50 to 10% and the magnet on the source to be processed.
- Dosage soft water treatment: 10 to 10 g/m3 of PAC depends on raw water turbidity.
- Dosage wastewater treatment (paper mills, textile dyeing and processing of seafood, food, slaughterhouses, waste water ...): 20 to 200 g/m3, depending on the concentration of suspended matter and the nature of wastewater
5. STORAGE
- Store in dry, cool

Kính chúc Quý khách sức khoẻ và thành đạt !
  BACK
OTHER PRODUCTS
Phen don ( Phen nhom)